PLEASE READ THESE INSTRUCTIONS

GET TO KNOW YOUR RECHARGEABLE CLOTHES DRYER

  1. On/Off – 2 speeds
  2. USB charging port
  3. Removing the Battery
  4. Lint Collection Bin
  5. Cutting Blades
  6. Metal mesh
  7. Spacer Ring for Cutting Height
  8. Brush included
  9. USB cable included

Precautions

  1. To prevent damage to your clothes: Avoid creases in the fabric and make sure the fabric lies flat.
  1. To prevent damage to your clothes: Avoid pressing the clothes steamer too hard against the fabric, but press firmly enough for it to be effective.
  1. Do not attempt to use the Clothing Holder while you or others are wearing the clothes. It can damage both your skin and the clothes.
  1. Stop using the clothes dryer immediately if you notice any damage or loose threads in fabrics or knitwear. Avoid cutting any threads that have come loose from the surface.
  1. Do not clean the machine until it has been turned off.

Before Use 

Around the buttons and zipper

Logo embroidery on the shirt

Stitches or sewing thread

Thin fabric or thread pull

¬ Test the product in a less visible area before use

Method 1.

  1. Start the clothes dryer using the push button.
  2. Gently move it back and forth, and possibly in small circles, over a soft knit. Don't press too hard, and watch out for loose threads, which should first be pulled to the back. Broken threads create holes.

Method 2.

  1. Quick Method: Rub the trimmer back and forth in a narrow area.
    Adjust the cutting height by turning the spacer ring. Follow the direction of the fabric grain. If there is a sewn-on logo or similar, work around it. The trimmer has a safety feature that shuts off the motor when the guard is unscrewed. So if the machine won’t start at any point, check to see if the guard is securely fastened.
  1. When working with thin fabric, it is important to smooth it out and stretch it so that no wrinkles form.
  2. Even soft knitwear should lie flat. Stretch the fabric out, for example, over an ironing board with the grain of the fabric running parallel to the board. Adjust the cutting height by turning the spacer ring. Never use the lint collector without the lint container in place. Remove it only for cleaning, with the machine turned off.
  3. Do not attempt to remove any pilling or lint from all-silk clothing. The lightweight fabric can easily be sucked into the shaver, which could cause the sharp blades to cut holes in the silk and damage it.
  4. How to Charge the Clothing Shaver: Turn off the shaver
  1. Plug the included USB cable into the port in the battery compartment at the end of the handle.
  2. The battery can be removed from the end of the handle. However, this is not necessary when charging.
  1. Plug the other end of the cord into a PC or a smartphone charger.

Contains a 1x600mAh lithium-ion battery. It may pose a risk of explosion and fire, especially if the electrical product has been subjected to impacts or overcharging. You should therefore keep an eye on your electrical products while they are charging.

Make sure it is not covered, as this prevents natural ventilation. Charge for a maximum of 2 hours—fully charged in 1 hour. Usage time: approx. 1 hour.

Size 11.3 x 15.7 x 7.5 mm
Minimum speed 8,000 RPM ± 5%
Maximum speed 10,000 RPM ± 5%
Effective battery voltage... voltage... 3.7V
Electricity 5W
Battery Specifications 1×14430
Charging current 650 mAh
Charging time 2.5H
Input 5V = 1A
Plug and Play Yes √
Security Feature When the plug is unplugged, the power is cut off

Cleaning

  1. Turn off the machine.
  2. Pull out the collection bin like a drawer and remove the lint.
  3. Unscrew the spacer ring completely.
  4. Unscrew the grille and remove the rotor and blades.
  5. Use the brush provided to clean the grille.
  6. Use the cleaning brush to remove dust and lint from the cutting blades.
  7. Use the cleaning brush to clean the edges.
  8. Put the rotor blades back in place and screw on the grille and spacer ring.

Distribution: www.TexCare.dk
Viborgvej 9 8900 Randers NV
Phone: 86 43 43 11 email@texcare.dk